How To Replace Grip Tape Skateboard
How To Replace Grip Tape Skateboard. Start by taking off your old grip tape. Carefully lift the grip tape using a sharp.
Now place your skateboard in a sideways position. For the standard deck, about 9″ x 33″ is a perfect size. Start by taking off your old grip tape.
Heat Up Your Grip Tape Either With A Blow Dryer, Or By Leaving It Out In Direct Sunlight.
Changing the grip tape is perhaps the most cost effective way to change the appearance of your board. How to apply grip tape. In this video we teach you how to remove your grip tape as part of our learn to skateboard series:
Immediately After, Get The Razor Blade Slightly Underneath The Grip Tape At.
Use a utility knife or razor blade to carefully peel it away from the deck, being careful not to scratch the wood. Make sure to remove both the wheels and their nuts. How to put grip tape on a skateboard.
Line Up Your New Grip Tape With Your Board.
Cut it out with scissors. The glue is applied between the grip tape and the skateboard deck for strength and can only be dissolved by heat, hence the need for a hairdryer. Now place your skateboard in a sideways position.
Align The Grip Tape With The Deck.
This will provide a visual outline for cutting. All you have to do is grab one of the skateboard's ends, and heat the edge with a hairdryer to loosen the adhesive. Get a grip tape according to your skateboard deck size.
Use A Screwdriver Or Anything With A Blunt Surface To Score The Grip Tape Around The Edges Of The Board.
Stick the grip tape onto your board! Here’s how to do it: Locate a safe socket and plug in.
Post a Comment for "How To Replace Grip Tape Skateboard"