How To Pop Bearings Out Of Skateboard Wheels
How To Pop Bearings Out Of Skateboard Wheels. The ds innov key is one of the most popular tools though the tool has come to be launched recently. You should pry the wheel.
In this video i show how to remove bearings from hard stubborn wheels using basic tools most people have. This is just a quick little tutorial on how to take your bearings out of your skateboard wheels. If you have a skate tool, then utilize it.
Unscrewing The Nut That Holds The Wheel Onto The Axle Is Vital To Removing A.
Unscrew the nut that holds the wheel on the axle. One end of the bearing will press down strongly inside the wheel, the other end. Undo the axle nuts with your skate tool or wrench and slide the wheels off the truck axle.
Unplug Bearing From The Wheel.
To do this, you’ll need to loosen the trucks. Once the bearing is at the axle’s tip, pry it out through leverage at a downward angle. The assembly sits in the inner parts of the skateboard wheels.
Now Remove The Nuts Of The.
You will need to remove. Use the lever to push the bearing off the wheel. Apply a force of the right hand on the wheel shaft.
Obliterate The Wheel And Use The Puller To Hook The Skateboard Bearing Out.
This is my first tutorial so if you want more of this kind o. Turn on the other side and do the process again till the other bearing pops out. 1) remove the old bearings from the wheel.
In This Video I Show How To Remove Bearings From Hard Stubborn Wheels Using Basic Tools Most People Have.
Repeat the steps with the other bearings. How to put bearings in skateboard wheels. You can do this by using a bearing puller or by prying them out with a flathead screwdriver.
Post a Comment for "How To Pop Bearings Out Of Skateboard Wheels"